POWDER ACCELERATING ADMIXTURE / QUICK-SETTING FOR SHOTCRETE ABAQUICK-P is a low rate powder alkaline accelerator of water-cement reaction developed forshotcrete with a very rapid setting time. It is formulated to be used both in wet-mix Shotcrete aswell as dry-mix shotcrete spray systems. Because...

LIQUID ACCELERATING ADMIXTURE / QUICK-SETTING FOR SHOTCRETE ABAQUICK-L is a non-alkaline accelerator of water-cement reaction. It can be used for wet mixshotcrete. It complies with the requirements of following standard: ASTM C1141 ......

SUPPLEMENTARY ADMIXTURE FOR CEMENT INJECTION SLURRY ABABUILD-1100 is an admixture based on synthetic polymers for injection cement slurry. It could effectively reduce water/cement ratio as well as modifying rheology of slurry and alsosignificantly reduce bleeding. It meets the requirements of t...

PURE GEL SILICA FUME GEL DESCRIPTION PURE GEL is an optimized slurry with high pozzolanic activity which can increase mechanical properties and durability factors in hardened concrete and make concrete impermeable. Surprisingly it could eliminates the environmental risks of using silica fu...

AMORPHOUS (NON-CRYSTALLINE) SILICON DIOXIDE (SIO2) E. M. MICROSILICA is a very fine, gray powder with highly active pozzolanic properties. E. M. MICROSILICA can be used in addition of cement or as replacement of a part of cementcontent. It has to be mentioned that E. M. MICROSILICA is composed ...

COLD WEATHER MORTAR ADDITIVE DESCRIPTION ANTIFREEZE-M is designed for producing cold weather mortar. The product combines actions of fast setting and preventing from freezing simultaneously as it accelerates the hardening of the mortar. It does not contain chlorides and other compounds which ...

DESCRIPTION ABATARD-P is a highly efficient set-retarding admixture with crystallized structure which temporarily stops the chemical action of hydration, delaying the initial set in direct proportion to the dosage used. It meets the requirements of the following standards: ASTM C494/C494 M TYP...

DESCRIPTION ABATARD-L is a highly efficient set-retarding admixture which temporarily stops the chemical action of hydration, delaying the initial set in direct proportion to the dosage used. It meets the requirements of the following standards: ASTM C494/C494 M TYPE B EN 934-2 ISIRI 2930 T...

AIR-ENTRAINING ADMIXTURE E.M.AIR is an air-entraining admixture for use in concrete and mortar. It is used to improve workability, cohesion, and durability of concrete and mortar by the ultra-stable air bubbles with appropriate size and spacing factor, uniformly distributed throughout the mixture...

SUPER PLASTICIZER / WATERPROOFING ADMIXTURE WITH HIGHLY POZZOLANIC MINERAL FOR READY-MIXED CONCRETE DESCRIPTION MEZUKRET is an advanced concrete admixture which improves the mechanical properties anddurability of ready-mixed concrete and could be added to the concrete mixtures at the job site. M...

DESCRIPTION ABAQUICK-AFL is a non-alkaline accelerator of water-cement reaction. It can be used for wet mix shotcrete. It is controlled based on: ASTM C1141, ASTM C1398 ......

DESCRIPTION ABAQUICK-AFP is a non-alkaline accelerator of water-cement reaction. It can be used for dry mix shotcrete. It is controlled based on: ASTM C1141, ASTM C1398 ......

EXPANDER ADMIXTURE FOR CONCRETE / MORTAR DESCRIPTION E.M.GROUT-500 is an advanced concrete and mortar admixture. It provides a controlled expansion when added to concrete or mortar. E.M.GROUT-500 is used where conjunction isrequired. It meets the requirements of the following standards: ASTM ...

COLD WEATHER CONCRETE ADDITIVE DESCRIPTION E.M.ANTIFREEZE-C is designed for cold weather concreting. The product combines actions of fast setting and preventing from freezing simultaneously as it accelerates the hardening ofthe concrete. It does not contain chlorides and other compounds which co...